如何烧录程序通过MSP-FET借助CCS7.1。
我能通过MSP-FET正常仿真，但是并没有将程序烧录到芯片当中。
而且观察DEBUG→MSP43X Option界面，也不能设置烧录等信息。
而在28335当中可以仿真的时候直接烧录。
是不是CMD设置不对？
/* ============================================================================ */
/* Copyright (c) 2018, Texas Instruments Incorporated */
/* All rights reserved. */
/* */
/* Redistribution and use in source and binary forms, with or without */
/* modification, are permitted provided that the following conditions */
/* are met: */
/* */
/* * Redistributions of source code must retain the above copyright */
/* notice, this list of conditions and the following disclaimer. */
/* */
/* * Redistributions in binary form must reproduce the above copyright */
/* notice, this list of conditions and the following disclaimer in the */
/* documentation and/or other materials provided with the distribution. */
/* */
/* * Neither the name of Texas Instruments Incorporated nor the names of */
/* its contributors may be used to endorse or promote products derived */
/* from this software without specific prior written permission. */
/* */
/* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" */
/* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, */
/* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR */
/* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR */
/* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, */
/* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, */
/* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; */
/* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, */
/* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR */
/* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
/* ============================================================================ */
/******************************************************************************/
/* lnk_msp430f2619.cmd - LINKER COMMAND FILE FOR LINKING MSP430F2619 PROGRAMS */
/* */
/* Usage: lnk430 <obj files...> -o <out file> -m <map file> lnk.cmd */
/* cl430 <src files...> -z -o <out file> -m <map file> lnk.cmd */
/* */
/*----------------------------------------------------------------------------*/
/* These linker options are for command line linking only. For IDE linking, */
/* you should set your linker options in Project Properties */
/* -c LINK USING C CONVENTIONS */
/* -stack 0x0100 SOFTWARE STACK SIZE */
/* -heap 0x0100 HEAP AREA SIZE */
/* */
/*----------------------------------------------------------------------------*/
/* Version: 1.206 */
/*----------------------------------------------------------------------------*/
/****************************************************************************/
/* Specify the system memory map */
/****************************************************************************/
MEMORY
{
SFR : origin = 0x0000, length = 0x0010
PERIPHERALS_8BIT : origin = 0x0010, length = 0x00F0
PERIPHERALS_16BIT : origin = 0x0100, length = 0x0100
RAM : origin = 0x1100, length = 0x1000
INFOA : origin = 0x10C0, length = 0x0040
INFOB : origin = 0x1080, length = 0x0040
INFOC : origin = 0x1040, length = 0x0040
INFOD : origin = 0x1000, length = 0x0040
FLASH : origin = 0x2100, length = 0xDEBE
FLASH2 : origin = 0x10000,length = 0x10000
BSLSIGNATURE : origin = 0xFFBE, length = 0x0002, fill = 0xFFFF
INT00 : origin = 0xFFC0, length = 0x0002
INT01 : origin = 0xFFC2, length = 0x0002
INT02 : origin = 0xFFC4, length = 0x0002
INT03 : origin = 0xFFC6, length = 0x0002
INT04 : origin = 0xFFC8, length = 0x0002
INT05 : origin = 0xFFCA, length = 0x0002
INT06 : origin = 0xFFCC, length = 0x0002
INT07 : origin = 0xFFCE, length = 0x0002
INT08 : origin = 0xFFD0, length = 0x0002
INT09 : origin = 0xFFD2, length = 0x0002
INT10 : origin = 0xFFD4, length = 0x0002
INT11 : origin = 0xFFD6, length = 0x0002
INT12 : origin = 0xFFD8, length = 0x0002
INT13 : origin = 0xFFDA, length = 0x0002
INT14 : origin = 0xFFDC, length = 0x0002
INT15 : origin = 0xFFDE, length = 0x0002
INT16 : origin = 0xFFE0, length = 0x0002
INT17 : origin = 0xFFE2, length = 0x0002
INT18 : origin = 0xFFE4, length = 0x0002
INT19 : origin = 0xFFE6, length = 0x0002
INT20 : origin = 0xFFE8, length = 0x0002
INT21 : origin = 0xFFEA, length = 0x0002
INT22 : origin = 0xFFEC, length = 0x0002
INT23 : origin = 0xFFEE, length = 0x0002
INT24 : origin = 0xFFF0, length = 0x0002
INT25 : origin = 0xFFF2, length = 0x0002
INT26 : origin = 0xFFF4, length = 0x0002
INT27 : origin = 0xFFF6, length = 0x0002
INT28 : origin = 0xFFF8, length = 0x0002
INT29 : origin = 0xFFFA, length = 0x0002
INT30 : origin = 0xFFFC, length = 0x0002
RESET : origin = 0xFFFE, length = 0x0002
}
/****************************************************************************/
/* Specify the sections allocation into memory */
/****************************************************************************/
SECTIONS
{
.bss : {} > RAM /* Global & static vars */
.data : {} > RAM /* Global & static vars */
.TI.noinit : {} > RAM /* For #pragma noinit */
.sysmem : {} > RAM /* Dynamic memory allocation area */
.stack : {} > RAM (HIGH) /* Software system stack */
#ifndef __LARGE_CODE_MODEL__
.text : {} > FLASH /* Code */
#else
.text : {} >> FLASH2 | FLASH /* Code */
#endif
.text:_isr : {} > FLASH /* ISR Code space */
.cinit : {} > FLASH /* Initialization tables */
#ifndef __LARGE_DATA_MODEL__
.const : {} > FLASH /* Constant data */
#else
.const : {} >> FLASH | FLASH2 /* Constant data */
#endif
.bslsignature : {} > BSLSIGNATURE /* BSL Signature */
.cio : {} > RAM /* C I/O Buffer */
.pinit : {} > FLASH /* C++ Constructor tables */
.binit : {} > FLASH /* Boot-time Initialization tables */
.init_array : {} > FLASH /* C++ Constructor tables */
.mspabi.exidx : {} > FLASH /* C++ Constructor tables */
.mspabi.extab : {} > FLASH /* C++ Constructor tables */
#ifdef __TI_COMPILER_VERSION__
#if __TI_COMPILER_VERSION__ >= 15009000
#ifndef __LARGE_CODE_MODEL__
.TI.ramfunc : {} load=FLASH, run=RAM, table(BINIT)
#else
.TI.ramfunc : {} load=FLASH | FLASH2, run=RAM, table(BINIT)
#endif
#endif
#endif
.infoA : {} > INFOA /* MSP430 INFO FLASH Memory segments */
.infoB : {} > INFOB
.infoC : {} > INFOC
.infoD : {} > INFOD
/* MSP430 Interrupt vectors */
RESERVED0 : { * ( .int00 ) } > INT00 type = VECT_INIT
RESERVED1 : { * ( .int01 ) } > INT01 type = VECT_INIT
RESERVED2 : { * ( .int02 ) } > INT02 type = VECT_INIT
RESERVED3 : { * ( .int03 ) } > INT03 type = VECT_INIT
RESERVED4 : { * ( .int04 ) } > INT04 type = VECT_INIT
RESERVED5 : { * ( .int05 ) } > INT05 type = VECT_INIT
RESERVED6 : { * ( .int06 ) } > INT06 type = VECT_INIT
RESERVED7 : { * ( .int07 ) } > INT07 type = VECT_INIT
RESERVED8 : { * ( .int08 ) } > INT08 type = VECT_INIT
RESERVED9 : { * ( .int09 ) } > INT09 type = VECT_INIT
RESERVED10 : { * ( .int10 ) } > INT10 type = VECT_INIT
RESERVED11 : { * ( .int11 ) } > INT11 type = VECT_INIT
RESERVED12 : { * ( .int12 ) } > INT12 type = VECT_INIT
RESERVED13 : { * ( .int13 ) } > INT13 type = VECT_INIT
DAC12 : { * ( .int14 ) } > INT14 type = VECT_INIT
DMA : { * ( .int15 ) } > INT15 type = VECT_INIT
USCIAB1TX : { * ( .int16 ) } > INT16 type = VECT_INIT
USCIAB1RX : { * ( .int17 ) } > INT17 type = VECT_INIT
PORT1 : { * ( .int18 ) } > INT18 type = VECT_INIT
PORT2 : { * ( .int19 ) } > INT19 type = VECT_INIT
RESERVED20 : { * ( .int20 ) } > INT20 type = VECT_INIT
ADC12 : { * ( .int21 ) } > INT21 type = VECT_INIT
USCIAB0TX : { * ( .int22 ) } > INT22 type = VECT_INIT
USCIAB0RX : { * ( .int23 ) } > INT23 type = VECT_INIT
TIMERA1 : { * ( .int24 ) } > INT24 type = VECT_INIT
TIMERA0 : { * ( .int25 ) } > INT25 type = VECT_INIT
WDT : { * ( .int26 ) } > INT26 type = VECT_INIT
COMPARATORA : { * ( .int27 ) } > INT27 type = VECT_INIT
TIMERB1 : { * ( .int28 ) } > INT28 type = VECT_INIT
TIMERB0 : { * ( .int29 ) } > INT29 type = VECT_INIT
NMI : { * ( .int30 ) } > INT30 type = VECT_INIT
.reset : {} > RESET /* MSP430 Reset vector */
}
/****************************************************************************/
/* Include peripherals memory map */
/****************************************************************************/
-l msp430f2619.cmd